A basic ESP32 Web server example
In this example we will create a basic web server with an ESP32,
Adding support for ESP32 boards
Adding support for ESP32 boards
A look at the ESP32
I'm a big fan of the ESP8266 devices that are available so when I saw that there was an ESP32 available I was interested to have a look.
Linkit One and MMA7361 example
The MMA7361L is a low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a 1-pole low pass filter, temperature compensation, self test, 0g-Detect...
Linkit One and ADXL335 accelerometer example
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale...
Linkit One and PCF8574 example
The PCF8574 is an 8 bits I/O port expander that uses the I2C protocol. Using this IC, you can use only the SDA and SCL pins of your Linkit One board to control up to 8 digital I/O ports.
Linkit One and AD Keypad example
I purchased this module as part of a microcontroller kit, its an interesting little module as it has 16 buttons but with only 1 I/O...
Linkit One and BH1750 example
BH1750FVI is an digital Ambient Light Sensor IC for I2C bus interface
Linkit One and SHT11 example
The SHT1x digital humidity sensor is a reflow solderable sensor. The SHT1x series consists of a low-cost version with the SHT10 humidity sensor, a...
Linkit One and BME280 sensor example
The BME280 is a humidity sensor features an extremely fast response time which supports performance requirements for emerging applications such as context awareness, and high accuracy over a wide temperature range.
Linkit One and BMP180 example
The BMP180 is a digital barometric pressure sensor of Bosch Sensortec
Linkit One and BMP085 module example
The BMP085 offers a measuring range of 30 to 110 kPa with an absolute accuracy of down to 0.1 kPa. It uses piezo-resistive technology...
Linkit One and MCP4725 example
MCP4725 is a single channel, 12-bit, voltage output Digital-to-Analog Converter with integrated EEPROM and an I2C Compatible Serial Interface.
Linkit One and MQ-135 gas sensor example
MQ-135 gas sensor is a hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection, gas-sensitive element test concentration.