A look at the MAG3110 magnetometer
In this article we look at the MAG3110 magnetometer, we will discuss the sensor and also show how to connect the sensor to a Raspberry Pi...
Various Beaglebone and flashing LED examples
In this example we connect 6 LEDs to our Beaglebone board and then flash them on and off, we have a Bonescript and Python...
LIS3DSH accelerometer sensor and Linkit One example
The LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state machine that can be programmed to implement autonomous applications.
Linkit One and Si1145 sensor example
The Si1145 is a low-power, reflectance-based, infrared proximity, ultraviolet (UV) index, and ambient light sensor with I2C digital interface and programmableevent interrupt output
Linkit One and TMP102 digital sensor example
The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C without requiring calibration or external component signal conditioning
VEML6075 ultraviolet light sensor and LinkIt One example
In this article we connect a VEML6075 sensor to a Linkit One.
The VEML6075 is an advanced ultraviolet (UVA / UVB) light sensor with an...
VEML6070 ultraviolet light sensor and LinkIt example
In this example we look at an VEML6070 UV sensor and connect it to a Linkit One
The VEML6070 is an advanced ultraviolet (UV) light...
SHT20 temperature and humidity sensor and LinkIt
In this article we connect a SHT20 sensor to a LinkIt one and the example is written in the Arduino IDE
The SHT2x series consists...
Arduino and GY_21P sensor data to Thingspeak example
In this example we connect an Ethernet shield to an Arduino, we then connect a GY-21P sensor to this and we will send the values to Thingspeak
Arduino and MPL3115A2 sensor data to Thingspeak example
In this example we connect an Ethernet shield to an Arduino, we then connect a MPL3115A2 sensor to this and we will send the values to Thingspeak
MPL3115A2 pressure sensor and LinkIT example
In this article we connect a MPL3115A2 sensor to a LinkIT one.
The MPL3115A2 is a compact, piezoresistive, absolute pressure sensor with an I2C digital interface....
MLX90615 infrared thermometer and LinkIT example
In this example we take a look at an MLX90615 IR thermometer, we will connect this to a LinkIT one. There will be 2 examples to look at which are written using the Arduino IDE
CCS811 digital gas sensor and LINKIT example
In this article we will connect a CCS811 gas sensor to a Linkit One and we will create an example using the Arduino IDE to display the values via web page and also a version which displays values on a web page
LinkIt One and LX1972 light sensor example
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response...