Home Blog Page 3

Beaglebone and BMG160 angular rate sensor example in python

The BMG160 is an ultra-small, digital 3-axis angular rate sensor with a measurement range up to 2000°/s and a digital resolution of 16 bit...

Beaglebone and LIS2DH three-axis linear accelerometer example in python

The LIS2DH is an ultra low-power high performance three-axis linear accelerometer belonging to the “femto” family, with digital I2C/SPI serial interface standard output. The LIS2DH...

Beaglebone and MCP4725 DAC example in Python

The MCP4725 is a single channel, 12-bit, voltage output Digital-to-Analog Converter with integrated EEPROM and an I2C Compatible Serial Interface. Features 12-Bit Resolution On-Board Non-Volatile Memory (EEPROM) ±0.2...

Beaglebone and HDC1080 humidity and temperature sensor python example

In this article we look at another sensor - this time its the HDC1080 and we will connect it to our Beaglebone and we...

Beaglebone and LM75 temperature sensor example in python

The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital over temperature detector. The host can query the LM75 through its I²C...

Beaglebone and L3G4200D 3-axial digital gyroscope example in Python

In this article we look at another sensor - this time its a L3G4200D 3-axial digital gyroscope and we will connect it to our...

Beaglebone and a PCF8591 example in python

In this article we look at another sensor - this time its the PCF8591 and we will connect it to our Beaglebone and we...

Beaglebone and BME280 humidity sensor python example

In this article we look at another sensor - this time its the BME280 and we will connect it to our Beaglebone and we...

Beaglebone and TMD2771 proximity and ambient light sensor python example

In this article we look at another sensor - this time its the TMD2771 and we will connect it to our Beaglebone and we...

Beaglebone and SI7021 sensor example in Python

In this article we look at another Humidity  and  Temperature  Sensor - this time its the Si7021  and we will connect it to our...

Beaglebone and MMA7660FC accelerometer example in python

In this example we look at the MMA7660FC accelerometer connected to a Beaglebone The MMA7660FC is a digital output I²C, very low-power, low-profile capacitive micro-machined...

Beaglebone and BMA250 acceleration sensor example in Python

The BMA250E is a triaxial, low-g acceleration sensor with digital output for consumer applications. It allows measurements of acceleration in three perpendicular axes. An evaluation...

Beaglebone and VCNL4010 proximity and ambient light sensor python example

In this article we look at another acceleration sensor - this time its the VCNL4010 and we will connect it to our Beaglebone and...

Beaglebone and MLX90614 infrared thermometer example in Python

The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your...