Home Blog Page 2

The MH-ET LIVE Tiny88 an Arduino Compatible development board

The MH-ET LIVE Tiny88 is an Attiny88 based micro-controller development board similar to the Arduino Nano, its a little cheaper but due to the...

an ESP32 based micro:bit board – the bpi:bit

In this article I will look at a development board called the bpi:bit. When you look at the picture below you will see that it...

An ESP32 board – the BPI:UNO32

In this article we look at another ESP32 based product, this time its called the BPI:UNO32. The microcontroller for this board is an ESP32 with...

The M5StickC – an ESP32 based development board

In this article we look at the M5StickC which is a development board based on the ESP32-PICO from m5Stack. In the image below you can...

M5StickC plus – an ESP32-Pico based module

In this article we look at the M5StickC Plus from m5stack which is a development module based on the ESP32-PICO. This is very similar to...

A tiny ESP32-Pico based development board called the Atom Lite

In this article we look at the Atom Lite which is a tiny development board based on the ESP32-PICO. This is a very small device...

The Microbit version 2 hardware

The latest hardware in the Micro:bit world is that a new and improved version will soon be available to buy for the same low...

The Radxa Zero a new Zero based form factor SBC

In this article we look at a potential Pi Zero type board called the Radxa Zero. Calling this a clone of the Raspberry Pi Zero...

A tiny open hardware ESP32-powered retro-gaming console

In this article we look at an interesting project which uses a ESP32 and creates a tiny retro gaming console. The console The MicroByte is a...

Beaglebone and MS5611 barometric pressure sensor example in python

In this article we look at another sensor - this time its the MS5611 and we will connect it to our Beaglebone and we...

Beaglebone and DS1624 temperature sensor in python

In this article we look at another sensor - this time its the DS1624 and we will connect it to our Beaglebone and we...

Beaglebone and DHT12 temperature sensor example in python

In this article we look at another sensor - this time its the DHt12 and we will connect it to our Beaglebone and we...

Beaglebone and TMP102 sensor example in python

In this article we look at the TMP102 digital sensor and we will connect it up to a Beaglebone The TMP102 device is a digital...

Beaglebone and LSM303DLHC sensor example in Python

The LSM303DLHC is a system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. The LSM303DLHC has linear acceleration full scales...